Filter
Top Products
30
1 Slide the POWER switch in the
direction of the arrow repeatedly to
light up the respective lamp.
2 Start recording.
• If the ACCESS lamp is on after recording is finished, it means data is still being written onto the hard disk.
Do not apply shock or vibration to your camcorder, and do not remove the battery pack or AC Adaptor.
• You cannot record movies and still images at the same time.
• A recordable time of movies in a succession is up to 12 hours.
• When a movie data file exceeds 2 GB, the next file is created automatically.
• For image quality of movies, see [REC MODE] (p.61), of still images, see [ IMAGE SIZE] (p.57).
Recording/Playback
Recording
Movies Still Images
Press START/STOP A (or B).
To stop recording, press START/STOP
again.
Press PHOTO lightly to adjust the
focus A, then press it fully B.
A shutter sound is heard. When
disappears, the image has been recorded.
PHOTO
POWER switch
START/STOP B
START/STOP A
Lens cover
Opens in accordance
with the setting of the
POWER switch.
Zoom lever
ACCESS lamp
Press the green button
only when the POWER
switch is in the OFF
(CHG) position.
REC
60min
P-MENU
START/
STOP
00:01:00
[STBY] b [REC]
123
3.0M
FINE
P-MENU
60min
Flashing b Lights up
Beep
Shutter
click