Filter
Top Products
112
Others
Symptom Cause and/or Corrective Actions
• COMMANDER is set to OFF in the menu settings.
c Set it to ON. (p. 64)
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted in the battery holder with the +
– polarities incorrectly matching the + – marks.
c Insert the batteries with the correct polarity. (p. 128)
• The batteries are dead.
c Insert new ones. (p. 128)
• DISPLAY is set to V-OUT/LCD in the menu settings.
c Set it to LCD. (p. 64)
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize. (p. 117)
• Some troubles has occurred in your camcorder.
c Remove the cassette and insert it again, then operate
your camcorder.
• The AC power adaptor is disconnected.
c Connect it firmly. (p. 14)
• Something is wrong with the battery pack.
c Contact your Sony dealer or local authorized Sony
service facility.
The Remote Commander supplied
with your camcorder does not work.
The melody or beep sounds for 5
seconds.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to outputs on
the TV or VCR.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.
Troubleshooting