Filter
Top Products
83
“Memory Stick” operations
1
2
4
5
6
1
M. CHROM
M. LUMI
M. LUMI
M. LUMI
III••••
I••••••
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
3
MEMORY MIX
100–0021
100–0021
100–0021
100–0021
Superimposing a still image in the “Memory Stick” on a moving
image – MEMORY MIX
Before operation
Insert a Hi8 /Digital8 tape for recording and a “Memory Stick” into your
camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press MEMORY MIX in the standby mode.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
(3) Press MEMORY+/– to select the still image you want to superimpose.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM y M. OVERLAP
(5) Press the SEL/PUSH EXEC dial.
The still image is superimposed on the moving image.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
M. CHROM – The color (blue) scheme of the area in the still image which is
to be swapped with a moving image
M. LUMI – The color (bright) scheme of the area in the still image which
is to be swapped with a moving image
C. CHROM – The color (blue) scheme of the area in the moving image
which is to be swapped with a still image
M. OVERLAP – No adjustment necessary
The fewer bars there are on the screen, the stronger the effect.
(7) Press START/STOP to start recording.
Still image