Sony DCR-TRV130E Camcorder User Manual


 
16
Charging time/Vereiste oplaadtijd
Battery pack/ Full charge /
Batterijpak Voor volledige lading
NP-F330
150
(supplied)
/(bijgeleverd)
NP-F530/F550 210
NP-F730/F750 300
NP-F930/F950 390
NP-F960 420
Notes
•Prevent metallic objects from coming into
contact with the metal parts of the DC plug of
the AC power adaptor. This may cause a short-
circuit, damaging the AC power adaptor.
•Keep the battery pack dry.
•When the battery pack is not to be used for a
long time, charge the battery pack fully, and
then use it until it fully discharges again. Do
this once a year. Keep the battery pack in a cool
place.
When the battery pack is charged fully
The CHG lamp goes out.
If the battery pack is not installed properly
The CHG lamp does not light up while charging
the battery pack.
If something is wrong with the battery pack
The CHG lamp flashes while charging the battery
pack.
If the power goes off although the battery
remaining indicator indicates that the battery
pack has enough power to operate
Charge the battery pack fully again so that the
indication on the battery remaining indicator is
correct.
Step 1 Preparing the power
supply
Opmerkingen
•Zorg dat er geen metalen voorwerpen tegen de
metalen contactvlakken van de
gelijkstroomstekker komen. Dit kan kortsluiting
veroorzaken en de netspanningsadapter
beschadigen.
•Houd uw batterijpakken vooral goed droog.
•Als u een batterijpak voorlopig niet meer
gebruikt, dient u het eerst nog eens volledig op
te laden en dan helemaal op te gebruiken tot
het totaal leeg is. Doe dit minstens eenmaal per
jaar. Bewaar het batterijpak daarna op een koele
droge plaats.
Na volledig opladen van een batterijpak
Het CHG oplaadlampje dooft.
Als het batterijpak niet goed is aangebracht
Dan zal het CHG oplaadlampje niet branden
tijdens het opladen van het batterijpak.
Als er iets mis is met het batterijpak
Dan knippert het CHG oplaadlampje tijdens het
opladen van het batterijpak.
Als de camcorder wordt uitgeschakeld, terwijl
de batterijspanningsindicator aangaf dat het
batterijpak nog voldoende stroom kon
leveren
Laad het batterijpak opnieuw volledig op, dan
zal de batterijspanningsindicator weer de juiste
gebruiksduur tonen.
Stap 1 Voorbereiden van de
stroomvoorziening
Geschatte oplaadtijd in minuten bij 25°CApproximate charging time at 25°C (77°F)