Filter
Top Products
101
Customizing your camcorder
3 Touch [ ].
flashes quickly. When the white
balance has been adjusted and stored in
the memory, the indicator stops
flashing.
b Notes
• Set [WHITE BAL.] to [AUTO] or adjust the
color in [ONE PUSH] under white or cool white
fluorescent lamps.
• When you select [ONE PUSH], keep shooting a
white object while is flashing quickly.
• flashes slowly if [ONE PUSH] could not
be set.
• When [ONE PUSH] was selected, if keeps
flashing after touching , set [WHITE BAL.]
to [AUTO].
• If you set [WHITE BAL.], [SCENE
SELECTION] is set to [AUTO].
z Tips
• If you have changed the battery pack while
[AUTO] was selected, or bring your camcorder
outdoors from inside the house, or vice versa,
select [AUTO] and aim your camcorder at a
nearby white object for about 10 seconds for
better color balance adjustment.
• When the white balance has been set with [ONE
PUSH], if you change the [SCENE
SELECTION] settings, or bring your camcorder
outdoors from inside the house, or vice versa,
you need to redo the [ONE PUSH] procedure to
readjust the white balance.
When you set [COLOR SLOW SHTR] to
[ON], appears, and you can record an
image brighter in color even in dark places.
To cancel [COLOR SLOW SHTR], touch
[OFF].
b Notes
• Adjust the focus manually ([FOCUS], p. 98)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
The image will be recorded at a maximum
of 16 times the sensitivity of NightShot
recording if you set [SUPER
NIGHTSHOT] to [ON] while the
NIGHTSHOT switch (p. 39) is also set to
ON.
appears on the screen.
To return to the normal setting, set [SUPER
NIGHTSHOT] to [OFF].
b Notes
• Do not use [SUPER NIGHTSHOT] in bright
places. This may cause a malfunction.
• Do not cover the infrared port with your fingers
or other objects (p. 39).
• Remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p. 98)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
You can record a transition with the
following effects adding to the interval
between scenes.
1 Select the desired effect in [STBY] (to
fading in) or [REC] (to fading out) mode,
then touch .
2 Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step 1.
If you press START/STOP, the setting is
canceled.
COLOR SLOW SHTR
(Color Slow Shutter)
SUPER NIGHTSHOT
FADER
Fading out Fading in
Continued ,