Filter
Top Products
6. Troubleshooting hints
Verify if the adapter plug is properly inserted in the
„ACC“ accessory socket on the camera.
Should the LC display of your mecablitz indicate
meaningless information or should the flash unit
not function properly in the individual modes, try to
remedy the problem as follows:
1a) Switch off the flash unit by its main switch.
1b) Remove the batteries.
1c) Switch on the flash unit for about 1 second and
then off again.
1d) Re-insert the batteries.
or / and:
2a) Switch off the camera and the mecablitz.
2b) Remove the SCA adapter from the mecablitz
and then re-mount it.
The flash unit should operate properly when it is
switched on again. Contact your local dealer
should this not be the case.
For the latest news and information please visit our
Internet homepage: www.metz.de
22
705 47 0025.A2-GB,I,E 20.02.2008 15:48 Uhr Seite 22