Filter
Top Products
10
TANDBERG 1000/550 for Cisco
CallManagerInstallation
Power Cable
• Connect the power supply to the ‘DC in’ input on
the system.
• Connect the power cable to the power supply.
• Connect the power cable to an electrical
distribution socket.
LAN Cable
• Connect a LAN cable from the ‘Ethernet’ connector on the system to your
LAN.
Wireless LAN - Insert PC Card
• Remove the “dummy” card by pressing the ‘Eject’ button next to the slot.
• Insert the Wireless LAN PC Card.
MAKE SURE YOU INSERT THE CARD IN THE RIGHT DIRECTION (SEE DRAWING). PUSH THE CARD
INTO THE SLOT UNTIL THE ‘EJECT’ BUTTON POPS UP.
See ‘Wireless LAN Settings’ for configuration.
NOTE