Filter
Top Products
TANDBERG 1000/550 for Cisco
CallManager
25
Advanced Use
IP-assignment
DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present.
DHCP: IP-address, IP-subnet mask and Gateway are not used because these parameters are assigned by
the DHCP server.
Static: The unit’s IP-address and IP-subnet mask must be specified in the IP-address field.
CHANGES IN THIS MENU WILL NOT HAVE ANY
EFFECT BEFORE THE SYSTEM IS RESTARTED.
NOTE
Network Settings
The network settings menu enables you to configure IP, TFTP, wireless LAN and DNS.
THE WIRELESS LAN SETTINGS MENU MAY NOT
BE
AVAILABLE. THIS DEPENDS ON WHETHER
YOUR
UNIT HAS A WIRELESS LAN CARD SLOT
OR NOT.
IP Settings
YOU SHOULD NOT CHANGE ANY NETWORK SETTINGS WITHOUT CONFIRMING THIS WITH YOUR SYSTEM ADMINISTRATOR. INCORRECT NETWORK
CONFIGURATION MAY CAUSE MALFUNCTION IN YOUR UNIT.
NOTE
NOTE