Filter
Top Products
TANDBERG 1000/550 for Cisco
CallManager
31
Peripherals
Peripheral Equipment
This chapter will explain how to connect peripheral equipment to your system, such as computers and head-
sets.
COM port
T1000 for Cisco CallManager Peripheral Equipment
PC-interface (serial cable)
A PC can be connected to your T1000 for Cisco CallManager using a serial cable. This enables you to interact
with the unit using data port commands. (This is also possible over LAN, using telnet). The available commands
are specified in a separate document. See the illustration below on how to connect.
Headset Interface
It is possible to use a headset with your T1000 for
Cisco CallManager. To enable audio to your headset,
press the large button in front of your unit.
Audio Mini-jack
Stereo jack (3.5mm) connector for headsets.
THE ISDN CONNECTORS ARE NOT IN USE
NOTE