Filter
Top Products
2-10 Operator's Manual LDK 23HS mkII - HS Camera System Assembling the Units
Camera Tripod
To mount the optional tripod adapter LDK 5031/00
onto the tripod and the camera onto the tripod adapter
proceed as follows:
a. Secure the tripod adapter (1) to the tripod wedge
plate using the screws supplied with the tripod.
Screws with threads of 3/8 inch, M4 or M8 can be
used with the tripod plate. Use two screws if
possible to ensure a secure mount.
b. Mount the two plates on the tripod.
c. Clip the front of the camera in under the lip (2) at
the front of the tripod plate and firmly push the
camera downwards and forwards until it clicks into
place.
d. Push lever (3) in the lock direction until the camera
is set firmly.
Caution
Failure to attach the camera to the
tripod plate in the correct manner could
result in an unsecured camera. Ensure that it
clicks into place.
To remove the camera from the tripod proceed as
follows:
a. Press the red locking lever (1) against release
handle (2) on the tripod adapter and hold.
b. Pull the release handle (2) forward.
c. The camera will spring free of the tripod adapter.
PHILIPS
PHILIPS
1
2
3
1
2