Filter
Top Products
3-2 Operator's Manual LDK 23HS mkII - HS Camera System Configurations
THS 1387
Single camera triax mode
LDK 23HS mkII
Triax cable,
maximum length:
800 m with 14 mm cable
(1000 m with minor
performance degradation)
Mains
AC power supply
CPU
LDK 4058
Two-wire data cable,
maximum length:
350 m (1,150 ft.)
Operational
Control
Panel
OCP
Mains of OCP
AC power supply
Series 9000 THOMSONOCP
OCP pwr
Camera
Base St
Gen lock
Triax
Non standard
Cam pwr
Pan lock
1
2
Var
Lin
R
G
B
Sup
CVBS
Seq
Preset
60 Hz
50 Hz
Nom
1/200
1/500
1/1000
Exposure Gamma Monitoring
Variable
Saturation
Wh clipBlk strBlk strSawGamma Flare
Contour Var
V-level Level
Lev depVar Bars Contour
Auto Auto wh Auto blk
Point
Slope
Knee
1/Clr
2
3
4
5
6
7
8/Cap
Aw 1
Aw 2
7500 K
5600 K
3200 K
++
+
0
Gain
Black
Col Temp GainFilter
115
8
Cam select
Centre
Range
Auto iris F-Number
Extender
Iris
On air
black
Master
Preview
12
34
Standard
Scene file
Store
Free
Call
V-level Level
Auto Auto wh Auto blk
Point
This configuration is the single camera Triax (Remote)
mode. In this case the camera is connected to a CPU
via a Triax cable which can have a maximum length
of 800 m with 14mm cable (1000 m with minor
performance degradation). The CPU provides the
power supply for the camera via the Triax cable. The
CPU receives its power from the AC mains supply.
The Triax cable carries R-Y, Y and B-Y video signals,
two audio signals and intercom signals from the
camera head to the CPU. It also carries external
video signals, and intercom signals from the CPU to
the camera.
Remote control of the camera when used in the Triax
mode is achieved by a remote control panel of the
Series 9000 Control System. This can be an
operational control panel (OCP) connected to the
CPU. The data communication between camera and
CPU is carried over the Triax cable. The control panel
can also be connected directly to the camera.
CABLE TEST
AC
DC
CAM ON
ON AIR
0
mains
Camera Processing Unit HS mkII