Filter
Top Products
Replacements Technical Manual LDK 20(S) - Studio Camera 3-3
To remove the front module proceed as follows:
a. On the frontside of the camera remove the four
screws
1
securing the front assembly.
b. Remove the front assembly from the camera.
c. Remove the Front Interconnection Board by
unscrewing two screws from the backside of the
front module.
d. Loosen the four screws
2
securing the front
module.
e. Slide the front module straight out of the front
assembly.
Front module
1
1
1
1
2
2
2
2