Filter
Top Products
21
5. Using the 3 supplied camera mounting screws M5 x 12, attach the housing unit to pipe.
Tighten 3 screws equally and ensure that no parts rattle.
Note: In this event, tighten screws while pressing the housing against the pipe.
4. After confirming the housing direction, push the housing up, then tighten 2 safety screws.
Top coverSafety screw
Safety screw
Housing
Align the
hole positions.
Figure viewed from the top.
Camera mounting screw
Camera
mounting screw
Safety screw
Camera
mounting screw
Safety screw
Camera mounting screw
M5 x 12 (with washer and spring washer)
(supplied with the C-BC711W)
Housing