TOA Electronics C-CC714 NT Film Camera User Manual


 
31
C-CC714 NT C-CC714 PL
24 V AC, 50/ 60 Hz (2P loose end)
10 W (normal operation), 80 W max.
RS-485 communications system (new protocol compatible)
VBS 1.0 V(p-p), 75 , BNC-R jack
RS-485 camera control connector, multi-pair cable 8P loose end (3P out of 8P)
3-channels, no-voltage make contact input, open voltage: 18 V DC,
short-circuit current: under 2 mA(settable alarm action), multi-pair cable 8P
loose end (3P out of 8P)*
1
1 channel, open collector output, withstand voltage: 30 V DC,
permissible current: under 100 mA, multi-cable 8P loose end (3P out of 8P)
Internal synchronization/ power synchronization (phase adjustable when in
power synchronization mode)*
2
each 8 alphanumeric character,
camera/ position/ trace/ auto-panning/ tour/ home/ sector/ AUX
255 positions
Auto-panning, Preset Sequence, Trace (2 patterns (60 sec.) possible to
memorize), Tour (possible to memorize 16 patterns)
Refresh: Start at the preset time every day or every week by timer settings
Program: Settable 16 actions
1/4 type CCD
Horizontal: 480 lines (at center)
50 dB
High-sensitivity function OFF: 1 lx (50IRE), 0.3 lx (20IRE)
High-sensitivity function ON: 0.03 lx (50IRE), 0.01 lx (20IRE)
pattern 1/ pattern 2/ pattern 3/ OFF
Slow shutter mode (32 times max.)
ATW/ AWB
Automatic correction
12 x zooming
One push/stop AF/continuous
22 x
f = 4.0 – 88 mm (22 times)
Horizontal: 47.3° (W) – 2.2° (T), Vertical: 36.5° (W) – 1.7° (T)
F 1.6 (W) – 3.8 (T)
WIDE end to TELE end
Approx. 1.3 s (preset operation), Approx. 2.4 s (manual operation)
Panning: endless 360° rotation, Tilting: +5° to –90°
Panning/ Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)
Manual limit
–40 to 50°C
Under 90% (no due condensation produced)
Indoors/ outdoors (avoid installing the unit on shore, in industrial area or in
locations exposed to corrosive gas, fine particles or unexpected strong wind.)
IP66
Case/ Top cover/ Decorative frame: PC resin, light gray
Sunshade: Aluminum, light gray, paint
Dome cover: PC resin (transparent)
Camera section external diameter: ø230 x 330.5 (H) mm
Dome external diameter: ø150 mm
4.4 kg
Model
Power Source
Power Consumption
Control system
Video Output
Camera Control Terminal
Alarm Input
Auxiliary Contact Output
Synchronization
ID
No. of Preset Positions
Automatic operation
Timer
Camera
Image Device
Resolution Horizontal
S/N Ratio
Minimum Illumination
Backlight Compensation
High-Sensitivity Function
White Balance
Flicker Reduction
Electronic Zooming
Auto-Focus
Lens
Zooming
Effective Focal Length
Effective Horizontal
View Angle
Maximum Aperture
Zooming Speed
Pan/Tilt Head
Rotating Range
Rotating Speed
Other Functions
Operating Temperature
Operating Humidity
Applicable Place
Dustproof/Waterproof
Capability
Finish
Dimensions
Weight
*
1
Either internal synchronization or power synchronization is selected when operated by the RS-485
communications control.
Note: The design and specifications are subject to change without notice for improvement.