Filter
Top Products
FEATURES
■
Protecting user privacy.
a) Privacy Masking function.*
Depending on system use requirements, there may be
several areas that the system administrator decides does not
require surveillance for whatever reason. Users are allowed
to select in advance the locations they wish to be excluded
from surveillance in a camera's field of view.
Onscreen selected areas can be masked with a rectangle
and a maximum of 8 areas (a single screen can have 2
masked areas) can be masked for privacy.
b) Restricting camera movement.
In addition to masking areas for privacy, a hardware-oriented
method is also available. A camera's rotation range in both
horizontal and vertical directions can be restricted to exclude
areas from surveillance.
■
Outdoor installation ready.
(meets IP66 standards)
C-CC714 and C-CC764 utilize a waterproof and dustproof
design that fully conforms to IP66 standards and can be safely
installed outdoors. Cameras are cased in a special housing that
withstands outdoor conditions, allowing them to be installed
outdoors, even if the location is directly exposed to rain.
■
Withstands cold weather conditions.
C-CC714 and C-CC764 incorporate a heating circuit that allows
operation in severe temperatures down to –40°C. Heating is
automatically turned on when ambient temperatures go below
0°C and will automatically switch off when the temperatures rise.
Note: Turning the camera on if the camera interior is below 0°C may
not result in producing an immediately viewable image. Once the
camera interior temperature rises above 0°C, images will be viewable.
■
Route tracing facilitates subject monitoring.
In order to make it easy to follow a subject
along a route, the camera can be set to
automatically monitor preset points for
up to 60 seconds. Two different routes
can be programmed.
■
Configuring programmable tours.
Through combinations of the 255 preset positions and trace
function, a camera can be programmed to automatically and
continuously repeat a travel pattern as a tour. Up to 16 tour
patterns can be programmed. Any tour program is able to
have a different travel pattern that can be activated by an
alarm input or timer.
■
Programmable camera operation initiated
by alarm input.
A useful Alarm function allows programming camera operation
that can be activated by an alarm input.
Desired camera operations such as position replay, touring,
tracing, and control of the auxiliary terminal can be programmed
to activate when the camera receives an alarm input. Each
camera is equipped with three (C-CC564 has eight) alarm inputs
and each alarm input can be set to respond with different
preprogrammed operation.
■
Preset operation start with Timer program
function.
A camera can conveniently be set to begin operation at a
preset time with an builtin timer. Each camera has a clock
function that can be set to initiate operation at a preset time.
The timer can be set for a specific date, day of the week, or
daily. Up to 16 different timer programs can be set.
■
Software for maintenance.
TOA cameras include dedicated software that allows easy
titles to be set and to create a backup of parameters with
a PC.
■
Flexible installation options.
TOA cameras can easily be installed on ceilings, walls or on
poles thanks to the wide range of mounting brackets available.
■
Titling options.
To facilitate camera use, various titles can be input and displayed
on the monitor. In addition to camera and position titles, other
titles for display include trace title, displayed while the trace
function is on, tour title, displayed when tour function is activated,
and alarm title displayed when an alarm input is received.
■
Other functions.
•Tilt (vertical) range: +5° — –185°.*
•Auto flip function*
•Rotation speed can be varied to match lens zooming ratio
in manual operation mode.
•Freeze preset function*
Displays the still image during camera movement between preset positions.
•Flicker-free operation
•The camera is equipped with 3 (C-CC564 has 8) alarm
inputs and 1 auxiliary contact output.
•RS-485 protocol control.
Function Comparison Chart
C-CC514 C-CC564 C-CC714 C-CC764
Minimum Illumination 1 lx (50 IRE) 3 lx (50 IRE) 1 lx (50 IRE) 3 lx (50 IRE)
(High-Sensitivity: OFF)
0.3 lx (20 IRE) 1 lx (20 IRE) 0.3 lx (20 IRE) 1 lx (20 IRE)
Wide Dynaic Function — ● — ●
B/W Mode Function — ● — ●
Optical Zooming 22x 23x 22x 23x
Zoom Speed
(WIDE end to TELE end)
(preset operation) Approx. 1.3s Approx. 1.6s Approx. 1.3s Approx. 1.5s
(manual operation) Approx. 2.4s Approx. 2.9s Approx. 2.4s Approx. 2.9s
Rotating Range
(Tilting)
+5° to – 95° +5° to – 185° +5° to – 90° +5° to –185°
Operating Temperature –10˚C to +50˚C –40˚C to +50˚C
Dust/Water Capability —— IP66
Auto Flip Function — ● — ●
Freeze Preset Function — ● — ●
Privacy Mask Function
—
Up to 8
—
Up to 8
(up to 2 each frame) (up to 2 each frame)
Motion Detection Function
— ● — ●
*C-CC764 and C-CC564 only