TOA Electronics C-CC764 Security Camera User Manual


 
C-CC764/C-CC-714
COMBINATION DOME CAMERA (OUTDOOR USE)
C-CC714 SPECIFICATIONS
Power source 24V AC 50/60Hz (2P loose end)
Power consumption 10W (normal operation), 80W max.
Control RS-485 communications system (new protocol compatible)
Video Output VBS 1.0V(p-p), 75, BNC-R jack
Camera Control Terminal RS-485 camera control connector, multi-pair cable 8P, loose end (3P of 8P)
Alarm Input 3 channels, no-voltage make contact input, open voltage: 18V DC,
short-circuit current; Under 2mA (settable alarm action),
multi-pair cable 8P, loose end (3P of 8P)
Auxiliary Contact Output 1 channel, open collector output, withstand voltage: 30V DC,
permissible current: Under 100mA, multi-pair cable 8P, loose end (1P of 8P)
Synchronization Internal synchronization/power synchronization
(phase adjustable when in power synchronization mode)
ID 8 characters (alphanumeric and symbols)
Camera, Position, Trace, Auto-pan, Tour, Home, Alarm, Sector, AUX
No. of Preset Positions 255 Positions
Automatic Operation Auto-pan, Preset sequence, Auto-trace (2 preset patterns (60s)), Tour (16 preset patterns)
Timer Refresh: Starts at the preset time every day or every week by timer settings
Program: Settable 16 actions
Camera
Image device 1/4 type CCD
Resolution Horizontal: 480 lines (at center)
S/N ratio 50dB
Minimum Illumination High-sensitivity function 0FF: 1 lx (50 IRE), 0.3 lx (20 IRE)
High-sensitivity function 0N: 0.03 lx (50 IRE), 0.01 lx (20 IRE)
Backlight Compensation Pattern 1/Pattern 2/Pattern 3/OFF
High-Sensitivity Function Slow shutter mode (32 times max.)
White Balance ATW/AWB
Flicker Reduction Automatic correction
Electronic Zooming 12x zooming
Auto-Focus One push/stop AF/continuous
Lens
Zooming 22x
Effective Focal Length f = 4.0 – 88mm (22X)
Effective Angle of View Horizontal: 47.3° (W) – 2.2° (T), Vertical: 36.5° (W) – 1.7° (T)
Maximum Aperture F 1.6 (W) – F 3.8 (T)
Zoom Speed WIDE end to TELE end
Approx. 1.3s (preset operation), Approx. 2.4s (manual operation)
Pan/Tilt Head
Rotating Range Panning: Endless 360° rotation, Tilting: +5° to –90°
Rotating Speed Panning/Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)
Other Function Manual Limit
Operating Temperature –40˚C to +50˚C
Operating Humidity Under 90% RH (no due condensation produced)
Application Indoors and outdoors (except seaside, industrial districts and locations exposed to fine particles,
where the unit is subject to corrosion, and heights that expose the unit to strong wind pressure)
Dust/Water Protection IP66
Finish Case, top cover and decorative frame: PC resin, light gray
Sunshade: Aluminum, light gray, paint
Dome cover: PC resin (transparent)
Dimensions Camera section external diameter: ø230
×
330.5 (H)mm
Dome external diameter: ø 150mm
Weight 3.9kg
Accessory
Top cover mounting screw (Hexagon socket screw M4 × 8) × 3,
CD-R (Camera controller software, manual (PDF)) × 1
Option Wall mounting bracket: C-BC711W, Suspension bracket: C-BC711P,
Pole mounting bracket: C-BC711PM, Smoked dome cover: C-A 711DM
C-CC764 SPECIFICATIONS
Power source 24V AC 50/60Hz (2P loose end)
Power consumption 10W (normal operation), 80W max.
Control RS-485 communications system (new protocol compatible)
Video Output VBS 1.0V(p-p), 75, BNC-R jack
Camera Control Terminal RS-485 camera control connector, multi-pair cable 8P, loose end (3P of 8P)
Alarm Input 3 channels, no-voltage make contact input, open voltage: 18V DC,
short-circuit current; Under 2mA (settable alarm action),
multi-pair cable 8P, loose end (3P of 8P)
Auxiliary Contact Output 1 channel, open collector output, withstand voltage: 30V DC,
permissible current: Under 100mA, multi-pair cable 8P, loose end (1P of 8P)
Synchronization Internal synchronization/power synchronization
(phase adjustable when in power synchronization mode)
ID 8 characters (alphanumeric and symbols)
Camera, Position, Trace, Auto-pan, Tour, Home, Alarm, Sector, AUX
No. of Preset Positions 255 Positions
Automatic Operation Auto-pan, Preset sequence, Auto-trace (2 preset patterns (60s)), Tour (16 preset patterns)
Timer Refresh: Starts at the preset time every day or every week by timer settings
Program: Settable 16 actions
Camera
Image device 1/4 type CCD
Resolution Horizontal: 480 lines (at center)
S/N ratio 50dB
Minimum Illumination High-sensitivity function 0FF: 3 lx (50 IRE), 1 lx (20 IRE)
High-sensitivity function 0N: 0.03 lx (50 IRE), 0.01 lx (20 IRE)
Backlight Compensation WIDE DYNAMIC/Pattern 1/Pattern 2/Pattern 3/OFF
Dynamic Range 46dB (backlight compensation: WIDE DYNAMIC operation)
High-Sensitivity Function B/W mode and slow shutter mode (32 times max.)
White Balance ATW/AWB
Flicker Reduction Automatic correction
Electronic Zooming 12x zooming
Auto-Focus One push/stop AF/continuous
Lens
Zooming 23x
Effective Focal Length f = 3.6 – 82.8mm (23X)
Effective Angle of View Horizontal: 54° (W) – 2.5° (T), Vertical: 41.6° (W) – 1.9° (T)
Maximum Aperture F 1.6 (W) – F 3.7 (T)
Zoom Speed WIDE end to TELE end
Approx. 1.5s (preset operation), Approx. 2.9s (manual operation)
Pan/Tilt Head
Rotating Range Panning: Endless 360° rotation, Tilting: +5° to –185°
Rotating Speed Panning/Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)
Other Function Auto-Pan, Freeze Preset, Manual Limit, Privacy Masking (up to 8),
Motion Detect (each 8 presets at each 4 positions)
Operating Temperature –40˚C to +50˚C
Operating Humidity Under 90% RH (no due condensation produced)
Application Indoors and outdoors (except seaside, industrial districts and locations exposed to fine particles,
where the unit is subject to corrosion, and heights that expose the unit to strong wind pressure)
Dust/Water Protection IP66
Finish Case, top cover and decorative frame: PC resin, light gray
Sunshade: Aluminum, light gray, paint
Dome cover: PC resin (transparent)
Dimensions Camera section external diameter: ø230
×
330.5 (H)mm
Dome external diameter: ø 150mm
Weight 3.9kg
Accessory
Top cover mounting screw (Hexagon socket screw M4 × 8) × 3,
CD-R (Camera controller software, manual (PDF)) × 1
Option Wall mounting bracket: C-BC711W, Suspension bracket: C-BC711P,
Pole mounting bracket: C-BC711PM, Smoked dome cover: C-A 711DM
• 255 preset positions
• 276X zoom (optical 23X, electronic 12X)
• Tilt rotation range +5° – -185°
(using Auto-Flip function)
•Pan rotation range continuous 360°
• Pan/tilt maximum rotating speed is 360°/sec
• 1/4 type CCD image device
• 480 lines high resolution
• Wide dynamic range
•Autofocus
• High-sensitivity function
(color and B/W modes)
• Preset sequency function
• Privacy masking function
• Restricting camera movement
•Auto-trace function
•Auto-tour function
• Motion detection function
•Auto-pan function
• Preset image freeze function
• Dust/Water Protection: IP66
• RS-485 protocol compatible
C-CC764 FEATURES
• 255 preset positions
• 264X zoom (optical 22X, electronic 12X)
• Tilt rotation range +5° – 90°
•Pan rotation range continuous 360°
• Pan/tilt maximum rotating speed is 360°/sec
• 1/4 type CCD image device
• 480 lines high resolution
•Autofocus
• High-sensitivity function
(color mode)
• Preset sequency function
• Restricting camera movement
•Auto-trace function
•Auto-tour function
•Auto-pan function
• Dust/Water Protection: IP66
• RS-485 protocol compatible
C-CC714 FEATURES