Filter
Top Products
Brackets and Dome Cover for C-CC764/C-CC-714 (Outdoor Use)
Brackets and Dome Cover for C-CC564/C-CC-514 (Indoor Use)
C-BC711P
Suspension Bracket
C-BC511A
Anchor Bracket
C-BC511C-S
Ceiling Mount Cover (Smoked)
The C-BC711P is exclusively designed to be
used to suspend TOA's outdoor
combination camera from a ceiling or eaves.
The C-BC711W is designed to be used to
mount TOA's outdoor combination camera
on a wall.
Finish Base: Aluminum, light gray, paint
Pipe: Stainless steel (SUS304)
Dimensions 140 (W) × 164 (H) × 200 (D)mm
Weight 1kg
Accessory Camera mounting screw (M5×12, with washer) × 3
Note: pay attention to the strength of the attaching portion.
Finish Base: Aluminum, light gray, paint
Pipe: Stainless steel (SUS304)
Dimensions 140 (W) × 240 (H) × 188.1 (D)mm
Weight 1.3kg
Accessory Camera mounting screw (M5×12, with washer) × 3
Note: pay attention to the strength of wall surface.
Transmissivity Approx. 30%*
Finish Dome: PC resin, smoked
Frame: PC resin, light gray
Dimensions ø219.8 × 128 (H)mm
(Dome external diameter: ø150mm)
Weight 400g
*As a general guideline, the minimum object illumination of the camera equipped with the
Smoked Dome Cover is approximately 3.3 times that of the camera without the cover.
Note: Be careful when installing the camera with this cover in low illumination location as the
cover may cause camera sensitivity to decrease.
C-BC711W
Wall Mounting Bracket
Finish Stainless steel (SUS304)
Dimensions 140 (W) × 200 (H) × 60 (D)mm
Weight 700g
Note: Reinforce the pole mounting bracket and mounting band separately for security when
installing the camera in locations exposed to vibration or strong winds.
Maintenance the unit, mounting bracket and mounting band periodically to ensure that there
are no loose joint nor rickety parts.
C-BC711PM
Pole Mounting Bracket
Finish Top cover: PC/ABS resin, cool gray
Pipe: Stainless steel (SUS304)
Bracket: Surface-treated steel plate, black, paint
Dimensions ø150 × 233mm
Weight 1.2kg
Accessory Top cover × 4, Safety wire × 1, Pattern paper × 1
Finish Top cover: PC/ABS resin, cool gray
Pipe: Stainless steel (SUS304)
Bracket: Surface-treated steel plate, black, paint
Dimensions 150 (W) × 203 (H) × 203 (D)mm
Weight 1.1kg
Accessory Top cover × 4, Safety wire × 1, Paper pattern × 1
C-BC511C
Ceiling Mount Cover
Using the optional YS-60B and C-BC711W, the
C-BC711PM can mount the outdoor combination
camera on a pole.
C-A711DM
Smoked Dome Cover
The C-A711DM Smoked Dome Cover is specially designed to
be used in conjunction with TOA's Combination Cameras.
The Dome Cover is used to make it difficult for individuals to
see the camera's orientation.
The C-BC511C-S is a camera installation
cover designed solely for mounting TOA's
Combination Cameras. The cover is used when
mounting the Combination camera directly to a
ceiling or wall or suspending it from the ceiling. The cover is used
to make it difficult for individuals to see the camera's orientation.
The C-BC511A is specially designed to
mount TOA's Combination Cameras directly
on the wall. The bracket facilitates mounting of the camera on the
plasterboard in the double ceiling or other locations where the
mounting screws cannot be installed securely.
The C-BC511C is a camera installation cover
designed solely for mounting TOA's
Combination Cameras. The cover is used when
mounting the Combination camera directly to a
ceiling or wall or suspending it from the ceiling. The cover is used
to make it difficult for individuals to see the camera's orientation.
C-BC511P
Ceiling Suspension Bracket
C-BC511W
Wall Mounting Bracket
The C-BC511P is a Ceiling Suspension Bracket
designed solely for suspending TOA's
Combination Cameras from the ceiling.
C-BC511U
Flush Ceiling Mounting
Bracket
C-BC511U-S
Flush Ceiling Mounting
Bracket (Smoked)
The C-BC511U-S bracket is designed to
be exclusively used for flush ceiling
mounting of TOA's combination camera.
Use this bracket when mounting the camera to
the ceiling surface where the fixing screws cannot be securely
installed, such as on the plaster panel of the dual-construction
ceiling. Also, use this bracket to minimize the exposure of the
camera. The bracket is used to make it difficult for individuals to
see the camera's orientation.
The C-BC511U bracket is designed to be
exclusively used for flush ceiling mounting
of TOA's combination camera. Use this bracket
when mounting the camera to the ceiling surface
where the fixing screws cannot be securely installed, such as on
the plaster panel of the dual-construction ceiling. Also, use this
bracket to minimize the exposure of the camera.
Finish Case: PC/ABS resin, cool gray
Dome cover: Acrylic resin, transparent
Dimensions ø168 × 182.2 (H)mm
(Dome external diameter: ø125mm)
Weight 220g
Transmissivity Approx. 20%*
Finish Case: PC/ABS resin, cool gray
Dome cover: Acrylic resin, smoked
Dimensions ø168 × 182.2 (H)mm
(Dome external diameter: ø125mm)
Weight 220g
*As a general guideline, the minimum object illumination of the camera equipped with the
Ceiling Mount Cover is approximately 5 times that of the camera without the cover.
Note:Be careful when installing the camera with this cover in low illumination location as the
cover may cause camera sensitivity to decrease.
Finish Bezel: PC/ABS resin, cool gray
Dome cover: Acrylic resin, transparent
Bracket: Aluminum, black, paint
Surface-treated steel plate, black, paint
Dimensions ø250 × 282.7 (D)mm
(Dome external diameter: ø125mm)
Weight 1.2kg
Accessory Safety wire × 1, Paper pattern × 1
Transmissivity Approx. 20%*
Finish Bezel: PC/ABS resin, cool gray
Dome cover: Acrylic resin, smoked
Bracket: Aluminum, black, paint
Surface-treated steel plate, black, paint
Dimensions ø250 × 282.7 (D)mm
(Dome external diameter: ø125mm)
Weight 1.2kg
Accessory Safety wire × 1, Pattern paper × 1
*As a general guideline, the minimum object illumination of the camera equipped with the
Flush Ceiling Mounting Bracket is approximately 5 times that of the camera without the bracket.
Note:Be careful when installing the camera with this bracket in low illumination location as the
cover may cause camera sensitivity to decrease.
Finish Surface-treated steel plate, black, paint
Dimensions 132 (W) × 30 (H) × 70 (D)mm
Weight 1.1kg
Accessory
Camera mounting screw × 4, Safety wire × 1, Paper pattern × 1
The C-BC511W Wall Mounting
Bracket is specially designed to mount
TOA's Combination Cameras to wall
surfaces. Install the unit only in a location
that can structurally support weight of the
unit and camera.