Filter
Top Products
Embedded DVR User Guide
________________________________________________________________________________________________________
29
SMART Check
S.M.A.R.T. = Self Monitoring Analysis & Reporting Technology.
Enable SMART Check to detect signs of HDD failure.
1. Set ENABLE S.M.A.R.T. to ENABLE or DISABLE.
2. Set a CHECK INTERVAL between 1 and 24 hours.
3. Define a TEMP THRESHOLD and select Celsius or Fahrenheit.
Note The recommended upper optimum operating temperature for the HDD is between 104F to 122F (40C to 50C).
4. Select a S.M.A.R.T. WARNING to be activated when the HDD reaches the defined threshold.
5. Select SAVE and press Enter to save settings.
Tip Select HDD INFORMATION and press Enter to view the current HDD, and USB drive information.