Filter
Top Products
- 15 -
To change the AE options:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to CAMERA SETUP and press the OPEN button to access the
Camera menu.
3. Position the cursor next to AE and press the OPEN button to access the AE menu.
4. Position the cursor next to the desired option and press the OPEN button to move the cursor to
the right.
5. Move the joystick up or down to select option setting.
6. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
6.7.4 ZOOM CONTROL
Direct
• The zoom feature has 4 varying speeds.
• The zoom feature can be controlled directly for Wide angle or Telephoto angle.
Menu
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU
<FOCUS>
WB ATW
<AE>
ZOOM LIMIT X18
SHARPNESS 10
<LINE LOCK>
PRIVACY ZONE
CAMERA MENU
•A zoom limit can be set to x18, x36, x72, x144, and x216.
• The maximum optical zoom is x18, x36 to x216 are the values for electronic zoom.
To change the zoom limit:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to CAMERA SETUP and press the OPEN button to access the
Camera menu.
3. Position the cursor next to ZOOM LIMIT and press the OPEN button to move the cursor to the
right.
4. Move the joystick up or down to toggle between zoom limits.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
At the time of SHUTTER PRIORITY mode choice, DAY/NIGHT mode is fixed in
MANUAL.
Note