Filter
Top Products
- 105 -
Playing Back/
Erasing Images
Other
Applications
Additional
Information
Getting Ready
Troubleshooting (continued)
Causes
The mode dial has been changed
to another setting.
The flash is set to Suppressed
Flash mode.
You pressed the shutter button
while the flash was charging.
The camera is set to Suppressed
Flash mode.
The battery is exhausted.
The subject is too far away.
The lens is not clean.
The image is out of focus.
The SmartMedia is write-
protected.
The frame is protected.
The SmartMedia is write-protected
Camera malfunction.
The mode dial has been moved to
another setting.
The camera is in the Auto Power
OFF mode.
The camera is in the PC mode.
Both the battery and AC adapter are
removed with the power still ON.
Problem
I cannot use the flash to
take pictures.
The flash will not charge.
The playback image is
too dark even though I
used the flash.
The playback image is
blurred.
I cannot format the
SmartMedia.
I cannot erase all the
frames.
Nothing happens when I
use the buttons and
switches.
Nothing is displayed
even through the LCD
monitor is set to ON.
The set date and time
disappears.
See Page
–
P.49
P.49
P.49
P.25
P.49
–
P.47
P.34
P.85
P.34
–
–
P.39
P.87
P.41
P.65
P.88
Remedy
Set the mode dial to the correct setting.
Set the flash to Auto, Red-Eye Reduction or
Forced Flash mode.
Wait until charging is completed before
pressing the shutter button.
Set the flash to Auto, Red-Eye Reduction or
Forced Flash mode.
• Charge the battery.
• Load a fully charged battery.
Move closer to the subject.
Clean the lens.
Set macro photography to ON or OFF
according to the distance up to the subject.
Remove the write-protection.
Remove the write-protection.
Remove the write-protection.
Turn the power OFF and remove the
battery once, and try again.
Set the mode dial to the correct setting.
Either press the shutter button half way
down, or change the mode dial setting.
Change the camera to the photography or
playback mode.
Set the date and time again.