Filter
Top Products
36
POP server name: It is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name up to 64 characters, or type the
IP address of the POP server. This setting is necessary when the SMTP server which
sends e-mails performs authentication using the POP user account.
User name, Password: Type the username and password of the user who has the mail
account. This setting is necessary when the SMTP server which sends e-mails performs
authentication.
Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You can
specify up to three recipient E-mail addresses.
Administrator e-mail address: Type the Administrator e-Mail address up to 64 characters.
This address is used for reply mail and sending system messages from the SMTP server.
Subject: Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is
sent according to the IP notification.
Message: Type the text of the E-mail up to 384 characters. Default value provides network
information including IP, Port, MAC, Model, Firmware Version and Web Version.
6.3.7 Messenger
If the firmware of your IP Camera has been updated to LM.1.6.16.03P5, then the Messenger
submenu will be displayed under the Network menu. Click the Messenger submenu, the
Messenger configuration page will be displayed similar to the figure shows below. This function
allows you to use the desired computer with MSN installed to view the video captured by the IP
camera.
(Supports up to Windows Live Messenger version 8089)