Filter
Top Products
20
5
USING THE CAMERA
You can access and manage the Wireless Internet Camera through:
1) a web browser, and 2) the enclosed software IPView Pro. This
chapter describes the Web Configuration Utility, and provides the
instructions on using the camera with a web browser.
Web Configuration Utility
The Wireless Internet Camera must be configured through its
built-in Web-based Configuration. (Extensive knowledge of LAN
will be helpful in setting up the Wireless Internet Camera.)
From the web browser, enter the default IP address 192.168.0.30
in the Address bar and then press [Enter] to access the Welcome
screen of the Configuration Utility. The Welcome screen is
shown on the next page.
NOTE: The computer’s IP address must correspond with the camera’s IP
address in the same segment for the two devices to communicate.