Filter
Top Products
29
IP Assignment
- Use Static IP Address: You can select this option and enter
the IP address directly. The default settings are:
• IP Address – 192.168.0.30
• Subnet Mask – 255.255.255.0
• Default Gateway – 192.168.0.1
- Obtain IP address automatically via DHCP: If your
network uses the DHCP server, select this option. According
to this setting, the camera will be assigned an IP address from
the DHCP server automatically. Every time when the camera
starts up, please make sure that the DHCP server is set to
assign a static IP address to your camera.
- Obtain IP address automatically via PPPoE: If your
application requires a direct connection from an ADSL
modem through the camera’s RJ-45 LAN port, click this
option and enter the User ID and Password into the respective
boxes. (Note: You should have an ISP PPPoE account.) The
camera will get an IP address from the ISP as starting up.
DNS IP Address
DNS (Domain Name System) server is an Internet service that
translates domain names into IP addresses. Enter at least one DNS
IP address.
Dynamic DNS
Check the Enable Dynamic DNS item to enable the Dynamic
DNS function, which allows you to run your domain over a
changing IP address. Select one Dynamic DNS provider from the
pull-down menu, and then enter the required information in the
following fields, including the Domain Name, User Name, and
Password.