© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP302PI
13
Enable Password Protection:
Yes: User needs to enter user name and password to stream the
camera.
No: User can stream the camera without entering the username and
password.
Add user: Enter the username and password to add guest users to access
the camera. The guest user can only view the live view video and is not
allowed to do any configuration.
User List: List all users that were added into the camera. Click “Edit” to
modify the user information. Click “Remove” to remove the users from the
list.
System >> Tools
Firmware Upgrade:
To update the firmware, click “Browse” to select the firmware, then click
“Upgrade” to proceed. Please do not disconnect power or Network cable during
firmware upgrading.
System Reboot: Click Reboot to reboot the IP camera.
Factory Reset: Click Reset to reset all the settings back to factory default value
Configuration:
Backup: Click Backup to save the configuration to your computer.
Restore: Click "Browse..." to select the configure file from your computer
then click Restore to restore all setting
NETWORK