Filter
Top Products
10
TV-IP522P ProView Me
g
a
p
ixel Internet Camera
Mic-In The camera is equipped with an internal microphone, however this can be augmented
by an external mic. Use this audio jack socket for an external microphone.
Line Out Use this audio jack socket to connect to external speakers for two-way audio
communication.
DC 12V
Insert the power adapter shipped with the camera directly if using the regular
lens; or insert the power adapter cable on the infrared lens connected to the
power adapter cable if using the infrared lens. This
is used to supply power to the camera. The camera will boot up when connected to a
power source. There is no separate power switch.
Auto Iris Connector
(DC drive)
Use this for fine-tuning adjustment of Auto Iris lens. Auto Iris lens are not included
with the camera. Please see the instructions of the lens manufacturer for more
information.
Note: Auto Exposure should be turned off when using an Auto Iris lens.
Reset Use to reset device to factory default settings including IP address and administrator
user name and password.
Ethernet Connect the Ethernet cable here.
Ethernet (PoE) Connect the Ethernet cable here. PoE connection provides network and device power
on networks that support PoE.
GPIO The camera provides the I/O connectors on the rear panel (pins 1/2 are for DC12V +/-
, pins 3/4/5/6 are for Photo-Relay Inputs, pins 7/8 are for Photo-Relay Outputs and
pins 9/10 are for RS-485 +/-), which provides the physical interface to send and
receive digital signals to a variety of external alarm devices.
Auto-Iris Connector (DC drive)
The camera supports additional Auto Iris Lens(DC drive), and provides the power control signal
required for adjusting the lens through this Auto-Iris Connector(DC drive)(4-pin) .You can attach any
standard Auto Iris Lens(DC drive)(optional) for specific purposes such as outdoor applications.