Filter
Top Products
43
TV-IP522P ProView Me
g
a
p
ixel Internet Camera
RS-485
RS-485 control is used to enable use of external devices (such as motorized rotational or pan and
tilt camera stand) operated through the I/O port.
Note: 485+/- of the I/O connector are used for RS-485. Refer to the manufacturer’s user manual
for
proper
connection instructions.
RS-485
support
To use a RS-485 Pan/Tilt device, click to check the Support PAN-TILT option box. Choose the
Protocol used for the device from the pull-down list. Check the remaining settings to make sure
they are compatible with the RS-485 device. Refer to the manufacturer’s instructions included with
the RS-485 device.
When the Pan/Tilt stand is properly connected and the RS-485 settings are compatible, the main
user interface will include directional control arrows used for pan and tilt control of the stand.
Directional View Controls in the main User Interface
Home button Left click the round button labeled [+] at the center of the controls to return the
camera to the Home position.
Pan / Tilt control Use your mouse and left click button to move the directional control in the
right panel of the video display page and left click on the arrow to move the camera in that
direction.