Filter
Top Products
39
TV-IP522P ProView Me
g
a
p
ixel Internet Camera
Sensor Output: You can set the camera’s sensor
output to VGA quality (640x640),HDTV quality (1280x720), 4VGA quality (1280x960).
Encode Type: This sets the video codec used for the video stream. You can choose MPEG-4 or
JPEG.IE browsers can view both MPEG-4 and MJPEG video streams, and non-IE browsers can
only view MJPEG streams.
Resolution: This sets the display resolution of the video stream. If the Resolution is different
than the Sensor Output size, the video will be shrunk or enlarged to the Resolution size you set
here.
FPS: (Frames Per Second): This sets the target number of frames per second (FPS) for the video
stream. Higher framerates will provide smoother video..
BPS: (Bits Per Second): BPS will affect the bit rate of the video recorded by the camera. Higher bit
rate will increase the video quality.
JPEG Quality: This sets the JPEG quality of any manual snapshots you take when this video profile is
selected.
RTSP URL: Is the URL used to connect to the camera when viewing for a mobile device or PDA.
Night Mode
Night mode allows the camera to use a longer shutter speed when the camera is in a low-light
environment. If the camera is in an area where there is sufficient lighting, Night Mode will not affect
the video stream. Choose a value in seconds to specify how long the shutter will remain open after
the camera flashes from the Shutter drop-down menu. This is useful in low light situations as it allows
you to get more ambient light from the background, allowing you to see more detail from both the
subject and background of your video/picture.
Camera Environment
The ICR (IR CUT Filter Removable) function provides enhanced night viewing by increasing the IR
sensitivity. The camera is equipped with a motorized ICR which can be removed in low-light or IR
illuminated applications. IR Cut removable allows to schedule IR activation by automatic, Day Mode,
Night mode.
- Automatic: Selecting the option that the camera will automatically switch between IR cut filter On
and Off, according to the current lighting conditions.
- Day mode: Selecting this mode that the IR-cut filter is always turned on.
- Night mode: Selecting this mode that the IR-cut filter is turned off.
Placed Location
User can look for a place that best suits your needs, either outdoor or indoor. The option can prevent
the outdoor direct strong Sunlight and indoor strong Lighting effecting images
Auto Exposure
The option controls the light coming into the camera through the electronic shutter. If auto-exposure
is enabled, then the camera will attempt to adjust the exposure to match the requested luminance
Audio Setup
Use the Audio Setup menu to enable and disable the microphone and speaker as well as adjust
the volume of each.
Click Ok to save the changes you have made to the Video and Audio settings.
Click Cancel to discard any changes made.