Filter
Top Products
16
http://www.tyan.com
Step 3:
Connect 2x5 ribbon cable between Tyan motherboard COM2 connector and Tyan
SMDC J2. (Check with www.tyan.com
SMDC FAQ for J2 connector)
Make sure that the key on the ribbon cable aligns with the key on the connector, and
that the red line on the ribbon aligns with pin 1 of the connector.
Step 4:
Locate the onboard “SMDC-Link” Network Interface Controller (NIC) on Tyan
motherboard. (M3291 uses one of motherboard onboard NIC for IPMI out-of-
band. Before using, please make sure which port M3291 used.
You can refer to http://www.tyan.com/support/html/faq_tso.html
motherboard
Illustration Picture)