Filter
Top Products
17
http://www.tyan.com
Chapter 3: M3295 Hardware Information
3.1 M3295 Card Images
3.2 M3295 Jumper Setting
Label Header Type/Part Description Pin Layout
J1 Reset M3295 BMC Reset
Jumper
3.3 Card Installation
Before you begin, please take the following precautions:
(6) Ground yourself properly before removing M3295 from the antistatic bag.
Unplug the power cord from your computer power supply and then touch a
safely grounded object to release static charge (i.e. power supply case). For
the safest conditions, TYAN recommends wearing a static safety wrist strap.
(7) Hold M3295 by its edges and do not touch the bottom of the card.
(8) Avoid touching M3295 components such as IC chips or connectors.
(9) Place M3295 on a grounded antistatic surface or on the antistatic bag that the
board was shipped in.
(10) Inspect the card for damage.
Note: This installation guide assumes that the user has already completed installing
their motherboard and chassis.
You can install M3295 card to your motherboard in three easy steps. Make sure your
system is powered off first.
Renesas
H8S2167
Davicom
DM9000A
J1
Reset Jum
p
e
r
LED