Filter
Top Products
33
http://www.tyan.com
z User account management
Add, modify and delete user. Assign privilege to user on the specific server.
5.5 Pre-setup and Installation
5.5.1 Pre-setup
Authentication and Privilege
TSO provides security access with MANAGER Authentication, Agent
Authentication and SMDC Authentication. User needs to prepare the
privilege information (user-name and password) for each system in order to
access target system.
z No password is prohibited
z Case sensitive under Linux and Out-of-Band
Internal-IP and External-IP
TSO requires Internal-IP and External-IP setup by user during the TSO installation.
User needs to make sure the IP matching with Network Interface Controllers (NIC).
z Configuration I
If CONSOLE is often being used outside of the subnet in which all/some
machines are equipped with SMDC, the machine that runs MANAGER would
have 2 NIC’s. MANAGER will likely be installed at the gateway or proxy
machine in the subnet.
¾ Configure Internal IP to be a valid IP under this subnet. This subnet is
typically known as a Local Area Network (LAN). The IP would look
like this for example: 192.168.1.1, 192.168.1.254
¾ Configure External IP to be a valid IP under the main network. This
main network is typically known as a Wide Area Network (WAN). This
IP would be a ‘true’ IP, meaning it is the one and only one among all
the machines in the world. The IP would look like this for example:
206.13.28.12, 216.239.53.99
z Configuration II
If CONSOLE is being used inside the same subnet, the machine that runs
Manager may have only 1 NIC. MANAGER can be located on any machine
in the network. Notice that MANAGER and CONSOLE need not be installed
on the same machine even though they can/may be install on the same
machine.
¾ Configure Internal IP to be a valid IP under this subnet.
¾ Configure External IP to be the same as Internal IP.
z Firewall
Firewall setup information:
TSO MANAGER and CONSOLE will use the following 4 ports for firewall
setup.
¾ TCP:
20010
21020