Filter
Top Products
19
2. Connect the mobile antenna plug into the ANT connector on
the rear panel. For more information on antenna installation,
please refer to the instruction guide that came with your
mobile antenna.
Permanent Mobile Installation
Permanently installing the BC355N scanner into a vehicle involves
two main steps - physically installing the scanner and physically
connecting the power supply. It does not matter which is installed
rst; perform these procedures in an order that is most appropriate
for your vehicle’s conguration.
Permanently Mounting the BC355N Unit
1. Select a location in your vehicle to mount the BC355N unit.
Avoid any locations that could interfere with your driving. In a
passenger car, the ideal location is underneath the dashboard
on the passenger side.
2. Use the mounting bracket (optional) as a template for
marking the location of the mounting screws.
Note: If there are screws already holding the dashboard,
you may be able to use the same screw holes to mount the
bracket.