Filter
Top Products
34
If You Want to Do
This -
Here’s How -
Stop scanning Press HOLD. The scanner stays on the
displayed channel until scanning is
resumed. The bank’s screen label remains
steady and does not ash.
Resume scanning Press one of the following keys to continue
scanning:
• HOLD – Press this key to release the Scan
Hold and continue scanning. The bank’s
screen label resumes ashing.
• UP or DOWN - Press these keys to step to
the next/previous frequency. Scan Hold
remains active but single channels can be
monitored.
• Any bank key - If you press a dierent
bank key, you will start scanning in that
new bank and the bank label will resume
ashing.
• L/O key - Press this key to lock out this
frequency and step to the next frequency