Filter
Top Products
35
If You Want to Do
This -
Here’s How -
Keep scanning
after the BC355N
has stopped on an
active channel
If the BC355N stops on an active channel
that you do not want to monitor but you
do not want to lock out, press the bank key
or the UP key. You will scan to the next
frequency.
Select a dierent
bank to scan
Use one of the following two methods:
1. Use the UP key to move through
frequencies and banks.
2. Deactivate the bank(s) you do not
want to listen to, leaving only the
desired band active.
Searching Band Tips
If You Want to Do This - Here’s How -
Begin searching Press the BAND key. The screen
displays the last known searched
band and then begins searching for
an active frequency in that band.