Filter
Top Products
26
KEY PURPOSE
SEARCH Press the SEARCH key to search for active
frequencies within a selected band range.
L/O Press this key to temporarily or permanently
lock out frequencies or channels from being
searched or scanned. (L/O is explained in more
detail in a later section.)
Turn on the scanner while pressing and
holding PROG + L/O to clear all memory.
BAND Pressing this key displays the upper/lower
limits of a band range for 3 seconds (i.e., 406
‐ 420) and then begins searching that band
range. Continue pressing the BAND key for
other searchable bands.
PROG Press this key to initiate and complete
programming a channel or frequency (further
detail is provided in a later section).
Note: If you press a non-programmable bank key (WX,
or
CB),”Error” will be displayed; press a programmable
bank key.