Filter
Top Products
English 112
Shooting
An image is
not captured
when the shut-
ter button is
pressed.
The maximum
number of
images that
can be cap-
tured or the
maximum
video clip
recording time
has been
reached.
Install a new
card.
14
Erase the
images that are
not necessary.
Save the
images to sep-
arate media,
then erase all
the images
from the card.
34, 91
The flash does
not operate.
The flash off
mode is
selected.
Set the flash to
automatic flash
mode or forced
flash mode.
43
The batteries
are dead.
Insert new bat-
teries.
14
When zooming
in or out, the
zoom
movement
stops
momentarily.
The optical
zoom has
moved to the
maximum
magnification
position.
Not a
malfunction.
Release the
zoom switch,
and press it
again.
42
There is noise
in the captured
image.
The ISO
sensitivity
setting is too
high.
Set the ISO
sensitivity to a
lower setting.
53
When
recording a
video clip
under
fluorescent
lights, a
noticeable
flicker appears
in the image.
This occurs
when the
shutter speed
is too fast.
Set the ISO
sensitivity to
6 or less.
53
Monitor
No playback
image
appears.
The playback
mode is not
active.
Press the
playback button
[=].
25
Problem Cause Action
Reference
page