Filter
Top Products
English 16
CAUTION
Be careful when removing the card.
iDo not attempt to forcibly remove the card.
iNever remove the card when the camera is connected to a computer or
printer, or when the self-timer indicator is flashing quickly. In doing so, you
risk losing the data stored in the card.
Manganese batteries cannot be used.
iNot only do manganese batteries have a short battery life, but there is the
danger of their overheating and causing damage to the digital camera.
Other batteries
iIf you wish to use batteries other than the alkaline batteries (LR6), we
recommend the following.
h AA-size nickel metal hydride (NiMH) rechargeable batteries (SANYO
eneloop HR-3UTG) × 2
h AA-size Ni-Cd batteries (SANYO AA-size 2700 Series HR3-UG) × 2
Do not open the battery/card cover when the camera is turned on.
iIf the battery/card cover is opened while the power is on, important data
may be lost. Uniden Corporation shall not be held responsible for any
losses that result from failure to comply with this warning.
HINT
Shooting without a card installed
iWhen a card is installed, images are recorded to and played back from the
card. When no card is installed, images are recorded to and played back
from the camera’s internal memory. When the camera is turned on with no
card installed, the internal memory icon is shown on the monitor to let
you know that the images you capture will be saved to the camera’s
internal memory.
About the internal backup battery
iThis camera’s internal battery serves to maintain the date and time
settings, as well as the shooting settings. The backup battery will be fully
charged when the batteries are kept in the camera continuously for about 2
days. In the fully charged state, the backup battery will maintain the
camera settings for about 7 days.
When not using the camera for a long time, remove the batteries.
iA small amount of power is still used even if the camera is turned off, and it
is therefore recommended that the batteries be removed from the camera
if it is not going to be used for a long time. Note that when the batteries are
removed for a long period, the time and date settings may be cleared.
Before using your camera again, be sure to confirm that the camera
settings are correct.