Viking Access Systems H-10 Photo Scanner User Manual


  Open as PDF
of 50
 
VIKING TECHNICAL SUPPORT 1.800.908.0884
17
GATE OPERATOR INSTALLATION
! TECHNICAL TIP: Before completing the installation procedure;
•
Openandclosethegatemanually,makingsurethereissufcientspacebetweenthegate
and adjacent walls.
•
Check that the wheels are turning freely on the track and there are no restrictions while
pushing the gate to the open and closed positions.
•
Conrmthatthereisadequatespacingfortheguiderollersandthatthereareno
restrictions throughout the travel of the gate.
STEP 1
Before securing the chassis to the
concrete pad or posts, make sure the
gate and operator are LEVEL and
PARALLEL. Minimum distance between
the operator and gate is 3”.
STEP 2
Chain Installation: Before welding the
provided chain brackets, make sure the
chain will be in a straight line with, and at
the same height as, the chain leaving the
gate operator rollers.
14.375"
 previous next