Filter
Top Products
Taking a Picture
7
TIP
Quick Review increases the drain on your batteries. If your batteries have a low charge, or if
you want to maximize the number of pictures you can take using one set of batteries, turn
Quick Review off.
Using Quick Review
When the Quick Review preference is set to On, the camera LCD displays the picture for a short period of
time after you have taken it. This feature allows you to instantly review a picture. It also gives you a
chance to immediately delete, or discard the image you have just taken.
To review and delete pictures using Quick Review:
1 Set the Mode switch to Capture.
2 Turn the camera on.
3 Take a picture.
4 Notice how the image appears on the LCD
screen. The LCD will display a Delete
icon and a status bar indicating that the
picture is being processed.
5 If you want to delete the picture before it
is stored on the memory storage card,
press the button immediately below the
Delete icon while the image is still
processing.
è When the picture has finished processing,
the status bar disappears and the image is
displayed for two more seconds before the
screen goes blank. During this time, the camera is ready to take a new picture, although you still have
the opportunity to delete the current picture.
è For information on changing the Quick Review setting, see Setting Quick Review on page 23.