4.2 Capture an Image -
In film-photography we say: “Take a Photo.” In digital-photography we say:
“Capture an Image.” Capturing an image with the Vivicam 3350 is easy.
Step 1: Power on the camera and look through the viewfinder to frame
your subject. Make sure your subject is no closer than three or four feet
(one meter) or else it will not be in good focus.
Step 2: Press the shutter button to capture an image.
The camera will beep once and the image counter will decrement by one
count.
For example the counter may change from 026 to 025.
This means that you may now take 25 more images. The display counter
shows the number of images remaining to be taken before the memory is full.
When the counter says 000 the memory is full and you must download your
images or delete them to make more space available.
Note: The ViviCam 3350 does not have a flash (strobe). If it is too dark
for the camera to capture a good image the camera will produce a
double-beep sound, indicating that the illumination level is too low. The
camera will not capture an image if you hear the “beep-beep” tone.