Filter
Top Products
22
user’s manual
digital camera
Taking Distant/Close-up Pictures
To take close-up pictures, press the Macro button to activate Marco mode.
Normal Mode Normal mode is selected by default and does not show any icon on
the status LCD. This mode allows you to take sharp-quality pictures
of sceneries and distant objects. You can use it with Capture ( ) ,
Sports ( ) , or Burst Mode ( ) .
Macro Mode Use Macro mode to gain sharpness and detail in pictures at close
range,within 7cm to 50cm distance between the subject and your camera.
Note:
When Macro mode is selected, the camera flash setting will
automatically be turned off . Also, you can only take close-up
pictures when the dial knob is set to Capture ( ) and Sports
Mode ( ).
The zoom lever will not take effect in this mode.
Zoom Control
This camera features two types of zooming, optical zooming and digital zooming (2X). The optical
zoom range is equivalent to 32mm~96mm in a 35 mm camera.
Optical Zoom
1.Turn the zoom lever to direction, it will move the lens towards to the wide-angle
position, meaning zooming away from your subject.
2.Turn the zoom lever to direction, it will move the lens towards the telephoto position.
Meaning zooming in your subject.
Digital Zoom
If you want your subject to appear larger and closer when the picture is taken, use your camera's
Digital Zoom feature. Your digital camera provides 2X Digital Zoom.
To use Digital Zoom, the LCD monitor is required.
1.Press the LCD button to turn on the LCD monitor.
2.Use zoom lever to zoom in your subject until the maximum TELE position , it will advance
to 2X digital after short pause. 2X is displayed on the status LCD.
3.Press the shutter button halfway down to lock in the auto focus and exposure, and then press
the shutter button all the way down to take the picture.