Filter
Top Products
- 10 -
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
If the administrator wants to fix the
IP address of the unit, check the
option "Use this IP whenever
system boots" to skip future
installation procedures. Otherwise
the unit will need installation
whenever it is restarted.
Click on “Set IP Address” button to
proceed.
Enter the wireless LAN settings
according to the access point in
infrastructure or Ad Hoc master.
The connection mode, SSID,
WEP settings are required. If
the settings are not sure at this
stage, click “Skip” to continue
installation in Ethernet. All the
settings can be entered later
from the web configuration
page.