Filter
Top Products
- 33 -
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
Build a security application
Administrators can combine options on the application page to perform many useful
security applications. There are
two trigger sources coming from
attached devices and/or motion
detection. There are also two
kinds of actions responding to
events including uploading
snapshots over internet and
driving attached devices. To
upload the snapshots, users can
choose wither email or FTP
according to user’s needs. Both
e-mail and FTP use the network
settings on the network page. Refer to the definition section for detail configuration.
1. Click on “Configuration” on
homepage,
2. Click on “Application” at the left
column,
3. Check the weekdays as you
need and give the period of
"Snapshots begin" time and
"Snapshots end" time to monitor
the trigger conditions every day,
4. Check the “Event operation”.
The trigger condition can be set to
detected motion or status of the
attached device,
5. Set the delay before detecting next event to avoid continuous false alarms