Filter
Top Products
- 34 -
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
following the original event,
6. Set the delay to take snapshots after event to capture the direction of the moving
objects,
Send snapshots when motion is detected
If no external sensor is available, administrators can utilize the built-in motion
detection to monitor any abnormal movement and then send emails with snapshots
included for security check.
7. Click on “Motion detection” at the left column,
8. Check “Enable motion detection”,
9. Click on new to have a new window to monitor video,
10. Type in a name to identify,
11. Use mouse to drag the window corner to resize or the title bar to move,
12. Tune the “Sensitivity” and “Percentage” according to the local environment. The
higher sensitivity, the easier motion is detected. The higher percentage, the more
difficult to detect small moving objects,
13. Click on save will enable the activity display. Green means the motion in the
window is under the watermark set by administrators and red means it is over the
watermark,
14. Click on “Application” at the left column,
15. Check the window name set in step 10,
16. Check “Upload snapshots while motion detected”,