Filter
Top Products
- 47 -
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
Motion detection
“Enable motion detection”, check this option to turn on the motion detection.
, click on this button to add a new window. At most three windows can exist at the
same time. Use the mouse to drag the window frame to resize or the title bar to move.
C licking on the ‘x’ at the upper right corner of the window can delete the window.
Remember to save to validate the changes.
, click on this button to save the related settings regarding to the window. A graphic
bar will rise or fall depending on the image variation. A green bar means the image
variation is under monitoring level and a red bar means the image variation is over
monitoring level. When the bar goes red, the detected window will also be outlined in
red. While back to the homepage, the monitored window will hide but the red frame will
show when motion is detected.
"Window Name", the text will show at the top of the window.
“Sensitivity”, it sets the endurable difference between two sequential images.
“Percentage”, it decides the space ratio of motioned objects over the monitored
window. Higher sensitivity and small percentage will make motion easier detected.
The following figure shows the screen when
is clicked. The monitoring window has
been outlined in red and the graphic bar goes red since the goldfish is moving.