Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 61
Event name: Enter a descriptive name for the event setting�
Enable this event: Select this option to enable this event setting�
Priority: Select the relative importance of this event (High, Normal, or Low)� Events with higher priority
setting will be executed rst.
Detect next event after seconds: Enter the duration in seconds to pause motion detection after a
motion is detected�
An event is an action initiated by user-dened trigger source; it is the causal arrangement of the following
three elements: Trigger, Event Schedule, and Action�
Trigger
Also referred as the cause or stimulus, denes when to trigger the Network Camera. The trigger source
can be congured to use the Network Camera’s built-in motion detection mechanism or external digital
input devices�
There are four choices of trigger sources as below�
Select the item to display the detailed congurations.
■ Video motion detection
This option makes use of the built-in motion detection mechanism as a trigger source� To enable this
function, you need to congure Motion Detection window rst. For more information, please refer to
Motion detection on page 52 for details�
■ Periodically
This option allows the Network Camera to trigger periodically for every other dened minute. At most
999 minutes can be set�