Filter
Top Products
To access the UPnP screen, navigate to [Settings] > [Network] > [UPnP]. The following
screen will appear.
Note: To enable UPnP on Windows, go to Add or Remove Programs in
Control Panel, then click Add/Remove Windows Components, double-click
“Network Services,” and check “UPnP User Interface.”
5.5.8 RTP
If you want to broadcast video using RTP (Real-time Transport Protocol), use this page
to set up the port range, video/audio address, and port number.
To access the RTP page, navigate to [Settings] > [Network] > [RTP]. The following
screen will appear.
5.5.9 QoS
QoS (Quality of Service) helps prioritize network traffic in order to reserve bandwidth for
necessary applications. This page will allow you to customize packet priority for different
types of packet data (video/audio, event/alarm, web) by specifying values for the DSCP
(Differentiated Services Code Point) field in their IP packets. The DSCP value that