Version 1.2 Page 30 4/22/04
Booting OpenVMS from the MP Console
Step 1 To log into the MP console, you may need to press carriage-return a couple of times.
You are then prompted to enter the user name and password. By default, they are set
to "Admin". If you are not prompted to login, you have old firmware and need to see
the section on updating the MP firmware.
******************************************************************
Only default users are configured.
Use one of the following user/password pairs to login:
Admin/Admin
Oper/Oper
******************************************************************
MP login: Admin
MP password: *****
Hewlett-Packard Management Processor
(c) Copyright Hewlett-Packard Development Company, L.P. 1999-2003. All
Rights Reserved.
MP Host Name: kthulu
Revision E.02.22
******************************************************************
MP ACCESS IS NOT SECURE
Default MP users are currently configured and remote access is enabled.
Modify default users passwords or delete default users (see UC command)
OR
Disable all types of remote access (see SA command)
******************************************************************
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Log
SL: Show Event Logs
CSP: Connect to Service Processor
SE: Enter OS Session
HE: Main Help Menu
X: Exit Connection
MP Host Name: kthulu
MP>
