A SERVICE OF

logo

Open as PDF
next previous
28 C
HAPTER
3: I
NSTALLING
AND
O
PERATING
THE
VCN A
CCESS
P
OINT
Figure 16
Mounting Underneath a Table
To mount the VCN AP under a table, perform the following tasks:
1
Tape the paper template (see Figure 17
) to the under side of the table.
Make sure that the straight edge is farthest away from you and the
partially curved edge is nearest to you.
Figure 17
Using the Paper Template to Mark the Table
The partially curved edge of the template corresponds to the curved cover
that is part of the VCN AP's front panel.
2
Remove the cover by sliding it downward and then pulling it outward.
See Figure 18
.
VCN AP Mounted
to Underside of
Table Top
paper
template