Filter
Top Products
46 C
HAPTER
4: U
SING
THE
L
OCAL
M
ANAGEMENT
A
CCESS
Figure 38
Change Work Mode Menu
In the
Change Work Mode Menu
, the current working mode is shown to
be one of:
■
Normal Operation
Normal operation is lack of loopbacks and half duplex.
■
Internal Loopback Mode
■
External Loopback Mode
■
Full Duplex Mode
The full duplex mode is displayed if a previous operation changed the
mode to full duplex.
Refer to Setting Duplex Mode
, on page 47, for changing the duplex
mode.
Setting Internal Loopback Mode
To set internal loopback mode, type
2
and press <Enter>. The message
appears:
This action will change the working mode of Ethernet!
Do you want to proceed (Y/[N])? :
To c o nfi r m t y pe
y
; to discard, type
n
; and and press <Enter>.
When you proceed, the message appears:
Action has been done.
Change Work Mode Menu
---------------------
Current Working Mode of Ethernet: Normal Operation
1. Set Normal Mode
2. Set Internal Loopback Mode
3. Set Extenal Loopback Mode
4. Set Full Duplex Mode
0. Return to Previous Menu
Please enter your choice: