68 C
HAPTER
4: U
SING
THE
L
OCAL
M
ANAGEMENT
A
CCESS
Download Failed for One or More VCN APs but not All
Check the following:
■
AP software version of the failed APs.
If the version is not 3.0 or later, locally download the current software
version to the VCN AP. Refer to Appendix C
, Loading Software
Through Local Access. Remote software download need not be
performed after this step.
■
Check the physical path between the downloading VCN AP and the
VCN APs.
■
Check the VDSL connection between the failed APs and the VCN AC.
■
Check the configuration of your switch and perform the following
steps:
Run the ConfApp program on the switch or perform manual
configuration according to Chapter 2
, Using the Local Management
Access, section Configuring the Ethernet Switch for the VCN Access
Concentrator.
Perform remote software download again.
